TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 276 of 1168

11-15. CARGO SHELL DOOR GRAB HANDLE REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

Remove four nuts (1), lockwashers (2), washers (3), countersunk screws (6), and grab handle (5) from

cargo door (4). Discard lockwashers (3).

INITIAL SETUP:

Applicable Models

All models except M996, M996A1, M997,

M997A1, M997A2, M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038,

M1038A1, M1042, M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

b. Installation

1.

Apply sealing compound to threads of countersunk screw (6).

2.

Install grab handle (5) on cargo door (4) with four countersunk screws (6), washers (3),

lockwashers (2), and nuts (1).

FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).

TM 9-2320-280-20-3

Change 2

11-27

Materials/Parts

Sealing compound (Appendix C, Item 45)

Four lockwashers (Appendix G, Item 173)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Forward end of cargo shell door raised

(TM 9-2320-280-10).