TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 314 of 1168

11-44. WEAPON STATION HATCH HINGE PIN REPLACEMENT

This task covers:

a. Removal

b.

Installation

a. Removal

1.

Remove two locknuts (3), washers (4), capscrews (7), and washers (4) from hatch hinge pin (5) and

hatch panel (1). Discard locknuts (3).

NOTE

Spacer not required on M1043, M1043A1, M1043A2, M1044,

M1044A1, M1045, M1045A1, M1045A2, M1046, and M1046A1

vehicles.

2.

Remove hatch hinge pin (5) and two spacers (2) from hinge pivot bracket (6) and hatch panel (1).

INITIAL SETUP:

Applicable Models

All models except M996, M996A1, M997,

M997A1, M997A2, M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038, M1038A1,

M1042, M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 70)

Manual References

TM 9-2320-280-24P

b. Installation

1.

Install hatch hinge pin (5) on hatch panel (1) and slide into hinge pivot bracket (6). Slide two

spacers (2) between hatch panel (1) and hinge pin (5) on top side of hatch panel (1).

2.

Secure hatch hinge pin (5) to hatch panel (1) with two washers (4), capscrews (7), washers (4), and

locknuts (3). Tighten locknuts (3) to 6 lb-ft (8 N

•

m).

TM 9-2320-280-20-3

11-64

Change 2