TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 323 of 1168

11-52. HINGE PIVOT BRACKET AND GUNNER'S SLING REPLACEMENT

This task covers:

a. Removal

b.

Installation

a. Removal

1.

Remove locknut (8), washer (2), capscrew (3), washer (2), gunner’s sling (9), and hinge pivot

bracket (6) from weapon station (1). Discard locknut (8).

2.

Remove capscrew (4), washer (5), and hinge pivot bracket (6) from weapon station (1) and rear

hinge pin (7).

INITIAL SETUP:

Applicable Models

All models except M996, M996A1, M997,

M997A1, M997A2, M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038,

M1038A1, M1042, M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Locknut (Appendix G, Item 128)

Manual References

TM 9-2320-280-24P

b. Installation

1.

Install hinge pivot bracket (6) on rear hinge pin (7).

2.

Install hinge pivot bracket (6) on weapon station (1) with washer (5) and capscrew (4). Tighten

capscrew (4) to 37 lb-ft (50 N

•

m).

3.

Install hinge pivot bracket (6) and gunner’s sling (9) on weapon station (1) with washer (2),

capscrew (3), washer (2), and locknut (8). Tighten locknut (8) to 37 lb-ft (50 N

•

m).

TM 9-2320-280-20-3

Change 2

11-73