TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 326 of 1168

11-76

Change 2

INITIAL SETUP:

Applicable Models

All models except M996, M996A1,

M997, M997A1, M997A2, M998, M998A1,

M1035, M1035A1, M1035A2, M1037,

M1038, M1038A1, M1042, M1097,

M1097A1, M1097A2, M1123

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four locknuts (Appendix G, Item 86)

Manual References

TM 9-2320-280-24P

11-55. TURRET HANDLE REPLACEMENT

This task covers:

a. Removal

b. Installation

Remove four locknuts (4), washers (2), capscrews (1), washers (2), and turret handle (3) from weapon

station tray (5). Discard locknuts (4).

a. Removal

Install turret handle (3) on weapon station tray (5) with four washers (2), capscrews (1), washers (2),

and locknuts (4).

b. Installation

TM 9-2320-280-20-3

NOTE

• Fabrication instructions are available to replace the turret

handle. Refer to appendix D (fig. D-95).

• The following procedure is for replacement of turret handle

that has been previously removed and installed in accordance

with the fabrication instructions.