TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 325 of 1168

11-54. WEAPON STATION BACKREST PAD REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

Remove three locknuts (4), washers (2), capscrews (3), washers (2), and backrest pad (5) from weapon

station (1). Discard locknuts (4).

INITIAL SETUP:

Applicable Models

All models except M996, M996A1, M997,

M997A1, M997A2, M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038,

M1038A1, M1042, M1097, M1097A1,1097A2,

M1123

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Three locknuts (Appendix G, Item 128)

Manual References

TM 9-2320-280-24P

b. Installation

Install backrest pad (5) on weapon station (1) with three washers (2), capscrews (3), washers (2),

and locknuts (4). Tighten locknuts (4) to 37 lb-ft (50 N

•

m).

NOTE

The procedure for removing and installing left and right backrest

pads is the same. This procedure covers right backrest pad.

TM 9-2320-280-20-3

Change 2

11-75