TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 327 of 1168

11-56. TURRET LOCK REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

Remove two locknuts (6), washers (1), capscrews (2), washers (1), turret lock (5), and spacer(s) (4) from

weapon station (3). Discard locknuts (6).

INITIAL SETUP:

Applicable Models

All models except M996, M996A1, M997,

M997A1, M997A2, M998, M998A1, M1035,

M1035A1, M1035A2, M1037, M1038, M1038A1,

M1042, M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 128)

Manual References

TM 9-2320-280-24P

b. Installation

Install spacer(s) (4) and turret lock (5) on weapon station (3) with two washers (1), capscrews (2),

washers (1), and locknuts (6). Tighten locknuts (6) to 37 lb-ft (50 N

•

m).

NOTE

Install same amount of spacers that were removed between bottom

of weapon station and turret lock. Amount of spacers may be

adjusted to correct lock handle binding. Refer to TM 9-2320-280-

24P if more spacers are needed.

TM 9-2320-280-20-3

Change 2

11-77