TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996
TM-9-2320-280-20-3

  TM-9-2320-280-20-3 - Page 341 of 1168

11-66. VEHICLE POWER CONDITIONER (VPC) MOUNTING BRACKET REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
Remove four locknuts (5), washers (4), screws (1), and vehicle power conditioner (VPC) mounting bracket (3)
from underside of radio rack (2). Discard locknuts (5).
INITIAL SETUP:
Applicable Models
M966, M966A1, M1036, M1045, M1045A1,
M1045A2, M1046, M1046A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Four locknuts (Appendix G, Item 96)
Manual References
TM 9-2320-280-24P
b. Installation
Install VPC mounting bracket (3) on underside of radio rack (2) with four screws (1), washers (4), and
locknuts (5). Tighten locknuts (5) to 6 lb-ft (8 N
•
m).
TM 9-2320-280-20-3
Change 2
11-91


Back to Top