TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 49 of 1168
10-19. 3.5-TON JACK STOWAGE BRACKET AND COVER REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Lift two latches (9) on cover (10) and remove cover (10) from bracket (5).
2.
Remove two wing nuts (14), spacers (13), washers (12), and jack (11) from bracket (5).
3.
Remove nut (6), washer (7), capscrew (8), and washer (7) from bracket (5).
4.
Remove two capscrews (4), lockwashers (3), washers (2), and bracket (5) from splash shield (1).
Discard lockwashers (3).
INITIAL SETUP:
Applicable Models
M997A2, M1025A2, M1035A2, M1043A2,
M1045A2, M1097A2, M1123
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Material/Parts
Two lockwashers (Appendix G, Item 135)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Hood raised and secured (TM 9-2320-280-10).
b. Installation
1.
Install bracket (5) on splash shield (1) with two washers (2), lockwashers (3), and
capscrews (4).
2.
Install washer (7), capscrew (8), washer (7), and nut (6) on bracket (5).
3.
Install jack (11) on bracket (5) with two washers (12), spacers (13), and wing nuts (14).
4.
Install cover (10) on bracket (5).
5.
Secure cover (10) on bracket (5) with two latches (9).
TM-9-2320-280-20-3
Change 2
10-33
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
NOTE
The tools for the jack are stored behind the driver’s seat.
Back to Top
