10-30. RIGHT INNER COWL INSULATION PANEL REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove three locknuts (7), washers (4), capscrews (5), washers (4), retainer (3), insulation (2), and
drain hose clamp (6) from cowl (1). Discard locknuts (7).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Three locknuts (Appendix G, Item 108)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Hood raised and secured (TM 9-2320-280-10).
b. Installation
Install drain hose clamp (6), insulation (2), and retainer (3) on cowl (1) with three washers (4), cap-
screws (5), washers (4), and locknuts (7).
TM 9-2320-280-20-3
Change 2
10-51
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
1
2
3
4
5
6
4
7