TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 60 of 1168
10-24. WINDSHIELD RETENTION BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove four capscrews (2), lockwashers (3), and retention bracket (1) from windshield frame (5).
Discard lockwashers (3).
2.
Inspect four nut inserts (4) for damage. Replace if damaged.
INITIAL SETUP:
Applicable Models
M997A2, M1025A2, M1035A2,
M1043A2, M1045A2, M1097A2
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
b. Installation
TM 9-2320-280-20-3
10-44
Change 2
Materials/Parts
Four lockwashers (Appendix G, Item 139)
Manual References
TM 9-2320-280-24P
Install retention bracket (1) on windshield (5) with four lockwashers (3) and capscrews (2).
1
2
3
4
5
~
Back to Top
