TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 845 of 1168

12-147. REAR RADIO RACK POWER CABLE REPLACEMENT

This task covers:

a. Removal

b.

Installation

INITIAL SETUP:

Applicable Models

M998, M998A1, M1038, M1038A1

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two lockwashers (Appendix G, Item 178)

Two locknuts (Appendix G, Item 79)

Lockwasher (Appendix G, Item 141)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-280-24P

Equipment Condition

Battery ground cable disconnected (para. 4-73).

1.

Remove two locknuts (6), washers (4), capscrews (3), washers (4), power cable (1), and clamps (2)

from radio rack (5). Discard locknuts (6).

2.

Remove two screws (8), clamps (7), power cable (1), and two antenna cables (12), if present, from

tunnel (11) .

3.

Remove grommet (9) from body (10) and power cable (1).

NOTE

It may be necessary to loosen front shunt mounting bolt to remove

capscrew from shunt.

4.

Remove nut (13), lockwasher (14), negative starter cable (15), nut (16), lockwasher (17),

capscrew (24), and power cable negative terminal (19) from shunt (18). Discard lockwashers (14)

and (17).

5.

Remove nut (23), lockwasher (22), and power cable positive terminal (21) from power stud (20).

Discard lockwasher (22).

a. Removal

TM 9-2320-280-20-3

12-232

Change 2