TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

  TM-9-2320-280-20-3 - Page 847 of 1168

FOLLOW-ON TASK: Connect battery ground cable (para. 4-73).
TM 9-2320-280-20-3
b. Installation
12-147. REAR RADIO RACK POWER CABLE REPLACEMENT (Cont’d)
1.
2.
3.
4.
5.
6.
Install power cable (1) on approximate mounting location. Install locator tape (5) on power cable (1)
in grommet (4), and install grommet (4) on body (6).
Install positive terminal (17) on power stud (16) with lockwasher (18) and nut (19). Tighten nut (19)
to 26 lb-ft (35 NŽm).
Install negative terminal (15) on shunt (14) with capscrew (20), lockwasher (13), and nut (12).
Tighten nut (12) to 75 lb-ft (102 NŽm).
Install negative starter cable (11) to capscrew (20) with lockwasher (10) and nut (9). Tighten nut (9)
to 75 lb-ft (102 NŽm).
Install two clamps (2) on power cable (1) and two antenna cables (8), if present, and install on tunnel
(7) with two screws (3).
Install two clamps (21) on power cable (1) and install on radio rack (24) with two washers (23),
capscrews (22), washers (23), and locknuts (25). Tighten capscrews (22) to 15 lb-ft (20 NŽm).
12-234


Back to Top