TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996
TM-9-2320-280-20-3

  TM-9-2320-280-20-3 - Page 855 of 1168

12-152. BIPOD STOWAGE TRAY MAINTENANCE
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
Applicable Models
M998, M998A1, M1038, M1038A1
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Tape (Appendix C, Item 50)
Thirteen locknuts (Appendix G, Item 88)
Six locknuts (Appendix G, Item 70)
Three lockwashers (Appendix G, Item 135)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-280-24P
1.
Remove five locknuts (7), washers (8), capscrews (1), and washers (8) from bipod stowage
tray (2) and wheelhouse (3). Discard locknuts (7).
2.
Remove three capscrews (6), lockwashers (5), washers (4), and bipod stowage tray (2) from
wheelhouse (3). Discard lockwashers (5).
3.
Remove tape from bipod stowage tray (2).
1.
Remove six locknuts (15), washers (13), capscrews (12), washers (13), and support bracket (14) from
tray (16). Discard locknuts (15).
2.
Unlatch straps (9) from footman loops (21).
3.
Remove four locknuts (18), washers (17), screws (11), two footman loops (10), and straps (9) from
tray (16). Discard locknuts (18).
4.
Remove four locknuts (19), washers (20), screws (22), and two footman loops (21) from tray (16).
Discard locknuts (19).
1.
Install two footman loops (21) on tray (16) with four screws (22), washers (20), and locknuts (19).
2.
Install two footman loops (10) on two straps (9) and tray (16) with four screws (11), washers (17),
and locknuts (18).
3.
Latch straps (9) to footman loops (21).
4.
Install support bracket (14) on tray (16) with six washers (13), capscrews (12), washers (13), and
locknuts (15). Tighten locknuts (15) to 6 lb-ft (8 N
•
m).
1.
Apply tape to bipod stowage tray (2).
2.
Install bipod stowage tray (2) on wheelhouse (3) with three washers (4), lockwashers (5), and
capscrews (6). Tighten capscrews (6) to 6 lb-ft (8 N
•
m).
3.
Secure bipod stowage tray (2) to wheelhouse (3) with five washers (8), capscrews (1), washers (8),
and locknuts (7). Tighten locknuts (7) to 6 lb-ft (8 N
•
m).
d. Installation
c. Assembly
b. Disassembly
a. Removal
TM 9-2320-280-20-3
12-242
Change 2


Back to Top