TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 911 of 1168

TM 9-2320-280-20-3

12-186. UNDERBODY PROTECTION KIT REPLACEMENT (Cont’d)

12-298

Change 2

1.

Remove six locknuts (6), twelve washers (2), six capscrews (3), four flat washers (5), and two

transmission support brackets (4) from intermediate shield (1) and transmission mount cross-

member (7). Discard locknuts (6) and flat washers (5).

2.

Remove locknut (8), two washers (9), and capscrew (10) from right support bracket (15) and right

side frame rail (16). Discard locknut (8).

3.

Remove locknut (22), two washers (19), and capscrew (18) from left support bracket (24), engine

mount bracket (17), and left side frame rail (23). Discard locknut (22).

4.

Remove four locknuts (14), eight washers (12), four capscrews (11), and right side support

bracket (15) from right side mounting bracket (13). Discard locknuts (14).

5.

Remove four locknuts (26), eight washers (21), four capscrews (20), and left side support bracket (24)

from left side mounting bracket (25). Discard locknuts (26).

6.

Remove two locknuts (29), four washers (30), two capscrews (31), and intermediate shield (1) from

front crossmember (27) and front shield (28). Discard locknuts (29).

c. Intermediate Shield Removal