TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 256 of 1258

NOTE

Perform steps 17 through 21 for all vehicles except M997A2,

M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, and M1123.

17.

Apply sealing compound to two flanged-head capscrews (13).

18.

Install alternator mounting bracket (14) on engine (19) with two flanged-head capscrews (13).

Tighten capscrews (13) to 48 lb-ft (65 N

•

m).

19.

Install alternator adjusting bracket (12) on alternator mounting bracket (14) with washer (20),

lockwasher (21), and capscrew (22).

NOTE

Perform step 19.1 for 6.5 L alternator/power steering bracket configuration.

19.1. Install alternator/power steering bracket (27) on engine (19) with three capscrews (28). Tighten

capscrews (28) to 48 lb-ft (65 N

•

m).

20.

Install support bracket (15) to exhaust manifold (18) with washer (16) and socket head screw (17).

Tighten socket head screw (17) to 25-33 lb-ft (34-45 N

•

m).

NOTE

Perform step 21 for vehicles with new support

bracket configuration.

21.

Install support bracket (23) on exhaust manifold stud (24) with washer (25) and locknut (26).

Tighten locknut (26) to 25-33 lb-ft (34-45 N

•

m).

3 - 2 6 .

ENGINE PREPA R ATION (6.2 L AND 6.5 L) (Cont’d)

TM 9-2320-280-34

Change 1

3 - 1 9 3