TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 265 of 1258

TM 9-2320-280-34

3-26.

ENGINE PREPARATION (6.2 L AND 6.5 L) (Cont ’d)

CAUTION

When using front eyelet on lifting sling, engine oil pan must be

supported during engine installation to prevent rear eyelet of

lifting sling from damaging windshield.

NOTE

Hoist must be attached to:

•

Forward eyelet of lifting sling when lifting engine on M996,

M996A1, M997, and M997A1 for 6.2 L.

•

Forward eyelet of lifting sling when lifting engine on M997A2 for

6.5 L.

•

Intermediate eyelet when lifting engine on all other models.

Rear eyelet when lifting engine and transmission together.

Sling bracket must be installed on rear of engine.

61.

Install sling bracket (38) on left cylinder head (39) with two capscrews (37).

62.

Install engine lifting sling (35) on right cylinder head (41) with two capscrews (40).

63.

Install pin (36) and sling bracket (38) on engine lifting sling (35)

3-201