TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 393 of 1258

TM 9-2320-280-34

6-6.

STARTER REPAIR

This task covers:

a.

Removal

b.

Assembly

b.

Cleaning

e.

Bench Testing and Adjusting

c.

Inspection

INITIAL SETUP:

Tools

Materials/Parts (Cont'd)

General mechanic's tool kit:

Two locknuts (Appendix E, Item 50)

automotive (Appendix G, Item 1)

Pinion O-ring (Appendix E, Item 120)

Washer kit (Appendix E, Item 213)

Test Equipment

Adhesive-sealant (Appendix B, Item 2)

Switch (Appendix G, Item 91)

Aircraft grease (Appendix B, Item 20)

Multimeter (Appendix G, Item 120)

Lithium grease (Appendix B, Item 22)

Carbon pile (Appendix G, Item 92)

Lubricating oil (Appendix B, Item 32)

Armature test set (Appendix G, Item 93)

Core shaft nut tool (Appendix C, Fig.

3)

Materials/Parts

Manual References

Pinion stop and snapring kit

TM 9-2320-280-20

(Appendix E, Item 125)

TM 9-2320-280-24P

Thrust washer and spacer kit

(Appendix E, Item 209)

Equipment Condition

Gasket set (Appendix E, Item 41)

Starter removed (TM 9-2320-280-20).

Gasket set (Appendix E, Item 42)

Core parts kit (Appendix E, Item 7)

Maintenance Level

Gasket kit, commutator end head

Direct support

(Appendix E, Item 40)

a.

Disassembly

1.

Remove plug (4) and gasket (5) from pinion housing (3).

Discard gasket (5).

2.

Using core shaft nut tool, remove locknut (2) from end of core shaft (1) located inside pinion

housing

(3).

Discard locknut (2).

6-46