TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 416 of 1258

TM 9-2320-280-34

6 - 8.

ENGINE WIRING HARNESS REPLACEMENT (Cont ’d)

4.

Remove capscrew (18), nut (20), clamp (19), and harness (16) from bracket (17).

5.

Remove nut (15), lockwasher (14), clamp (13), and harness (16) from cylinder block (12).

Discard

lockwasher (14).

NOTE

Perform steps 6 and 7 for 6.2 L only.

6.

Disconnect harness connector 315C (23) from transmission connector (22).

7.

Remove screw (25), clamp (24), and harness (16) from transmission (21).

6-69