TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 474 of 1258

TM 9-2320-280-34

7-7.

TRANSMISSION/TRANSFER CASE INSTALLATION (3L80)

(Cont ’d)

NOTE

Be certain torque converter rotates freely

3.

Apply sealing compound to capscrews (5) and studs (2).

4.

Move transmission (3) forward onto engine dowels (6).

Install four capscrews (5) and two studs (2) on

transmission (3) and engine (1).

Tighten capscrews (5) and studs (2) to 35 lb-ft (48 N.m).

5.

Install speedometer cable (12) in bracket (13) and install 90 ° adapter (11) to transfer case (4).

6.

Raise transmission (3) and transfer case (4) and remove stand supporting engine (1).

Install

transmission mount crossmember (TM 9-2320-280-20).

7.

Remove safety chain and lower transmission jack.

NOTE

It will be necessary to rotate flywheel clockwise from capscrew in front

of crankshaft to gain access to capscrews securing torque converter.

8.

Align torque converter (8) with holes in flywheel (10).

Install six capscrews (9) and torque

converter (8) on flywheel (10).

9.

Tighten capscrews (9) to 32 lb-ft (43 N.m).

7-13