TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 483 of 1258

TM 9-2320-280-34

7-9.

TRANSMISSION/TRANSFER CASE INSTALLATION (4L80E) (Cont ’d)

1.

Place transmission (3) and transfer case (4) on transmission jack and secure with safety chain.

WARNING

Do not use hands to free transmission/transfer case assembly of

hangups or snags.

Use prybar to avoid injury.

CAUTION

Always install transmission/transfer case assembly slowly.

Raise into

chassis carefully and closely observe all components to prevent

damage.

2.

Position transmission (3) and transfer case (4) under vehicle and raise into place, aligning converter

housing pilot holes (9) with engine dowels (8).

NOTE

Be certain torque converter rotates freely.

3.

Move transmission (3) forward onto engine dowels (8).

Install four capscrews (7), two studs (2), and

transmission (3) on engine (1).

Tighten capscrews (7) and studs (2) to 35 lb-ft (47 N.m).

4.

Connect main vent (5) to transmission/transfer case vent line (6).

5.

Raise transmission (3) and transfer case (4) and remove stand supporting engine (1).

7-22