TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 489 of 1258

TM 9-2320-280-34

7 - 10.

TRANSMISSION PREPARATION

7-10. TRANSMISSION PREPARATION

This task covers:

a. Disassembly

b. Assembly

INITIAL SETUP:

Tools

Materials/Parts

General mechanic's tool kit:

Six locknuts (Appendix E, Item 58)

automotive (Appendix G, Item 1)

Anaerobic gasket sealer (Appendix B, Item 45)

Special Tools

Equipment Condition

Torque adapter, 9/16 in. (Appendix G, Item 106)

Transmission/transfer case assembly removed

(para. 7-6 or 7-8).

Maintenance Level

Direct support

a. Disassembly

1.

Disconnect transmission/transfer case cooler lines (3) from transmission (2).

2.

Remove capscrew (4) and transmission/transfer case vent line clamp (5) from transmission (2).

3.

Remove six locknuts (1) and transmission (2) from transfer case adapter (7). Discard locknuts (1).

4.

Clean old sealer from transfer case adapter (7).

b. Assembly

1.

Apply anaerobic gasket sealer to transmission mounting surface (6).

2.

Install transmission (2) on transfer case adapter (7) with six locknuts (1). Using torque adapter,

tighten locknuts to 26 lb-ft (35 N m).

3.

Install transmission/transfer case vent line clamp (5) to transmission (2) with capscrew (2). Tighten

capscrew (4) to 11 lb-ft (15 N m).

4.

Connect transmission/transfer case cooler lines (3) to transmission (2).

7-28