TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 484 of 1258

TM 9-2320-280-34

7-9.

TRANSMISSION/TRANSFER CASE INSTALLATION (4L80E) (Cont ’d)

NOTE

Bracket nuts must be loosened prior to installation of crossmember on

vehicle for proper alignment.

6.

Loosen two nuts (22) on bracket (20) and crossmember (24).

7.

Install bracket (20) and crossmember (24) on transmission adapter (15) with two capscrews (23).

Tighten capscrews (23) to 65 lb-ft (88 N.m).

8.

Install two nuts (12), washers (13), cable (14), washer (26),

and locknut (25) on crossmember (24)

and support bracket (10).

Tighten locknut (25) to 90 lb-ft (122 N.m).

9.

Install capscrew (17), two washers (18), bypass valve (16), and nut (21) on crossmember (24) and

support bracket (19).

Tighten nut (21) to 65 lb-ft (88 N.m).

10.

Tighten two nuts (22) to 65 lb-ft (88 N.m).

7-23