TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 552 of 1258

11-5. STEERING GEAR REPAIR (Cont'd)

NOT E

Soak teflon rings in warm water to ease assembly.

13.

Starting on inner seal ring groove, install O-ring seal (2) and a backup teflon ring (1) on valve

body (11).

14.

Repeat step 13 in order from innermost seal ring groove and install two remaining O-rings (2) and

teflon rings (1) on valve body (11).

NOT E

Rotate valve spool to install in valve.

15.

Install O-ring (9) on valve spool (8) and install valve (8) into valve body (11) until flush with notched

end of valve body (11).

16.

Install stub shaft (6) in valve spool (8) so pin (3) on stub shaft (6) engages hole (7) in valve spool (8).

17.

Align notch (5) in stub shaft cap (4) with pin (10) in valve body (11) and press stub shaft (6) and

valve spool (8) into valve body (11).

TM 9-2320-280-34

1 1 - 2 0

Change 1