TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

  TM-9-2320-280-34 - Page 553 of 1258

18.
Install O-ring (16) in valve body (11).
19.
Insert worm shaft (14) into valve body (11).
20.
Engage locating pin (15) on worm shaft (14) with slot (17) in valve body (11).
NOT E
Coned surface of races face toward housing.
21.
Install lower thrust bearing race (18), lower thrust bearing (13), and lower thrust bearing race (18)
on worm shaft (14).
22.
Install assembled valve body (11) and worm shaft (14) into housing (12).
23.
Install O-ring seal (24), large upper bearing race (23), upper thrust bearing (22), small upper
bearing race (21), thrust bearing spacer (20), and bearing retainer (19) on adjuster plug (25). Press
retainer (19) onto adjuster plug (25) with a brass drift.
24.
Install stub shaft oil seal (26) in adjuster plug (25). Install far enough to provide clearance for dust
seal (27) and retaining ring (28).
25.
Install stub shaft dust seal (27) and retaining ring (28) in adjuster plug (25).
1 1 - 5 . STEERING GEAR REPAIR (Cont'd)
TM 9-2320-280-34
Change 1
1 1 - 2 1


Back to Top