TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 555 of 1258

11-5. STEERING GEAR REPAIR (Cont'd)

33.

Install housing end plug O-ring seal (10) and housing end plug (9) in housing (3).

NOT E

Opening in retaining ring should be located approximately 1 in.

(25 mm) from access hole.

34.

Install retaining ring (8) in housing (3).

35.

Install side cover gasket (15) on side cover (13) by bending tabs (14) around side cover (13) edge.

36.

Screw side cover (13) onto adjuster screw (16).

37.

Install four capscrews (12) on side cover (13). Tighten capscrews (12) to 40 lb-ft (54 N

•

m).

38.

Install lash adjuster nut (11) on pitman shaft adjuster screw (16).

TM 9-2320-280-34

Change 1

1 1 - 2 3