TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996
TM-9-2320-280-34

  TM-9-2320-280-34 - Page 597 of 1258

TM 9-2320-280-34
12-22. REAR CROSSMEMBER REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Tools
Equipment Condition
General mechanic's tool kit:
Rear crossmember braces removed
automotive (Appendix G, Item 1)
(TM 9-2320-280-20).
Materials/Parts
Maintenance Level
Four locknuts (Appendix E, Item 59)
Direct support
Manual References
TM 9-2320-280-20
TM 9-2320-280-24P
a
Removal
Remove four locknuts (3), washers (2), capscrews (5), washers (2), and rear crossmember (1) from two
rear crossmember mounting brackets (4). Discard locknuts (3).
b.
Installation
Install rear crossmember (1) on two rear crossmember mounting brackets (4) with four washers (2),
capscrews (5), washers (2), and locknuts (3). Tighten locknuts (3) to 90 lb-ft (122 N.m).
FOLLOW-ON TASK: Install rear crossmember braces (TM 9-2320-280-20).
12-40


Back to Top