TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 602 of 1258

TM 9-2320-280-34

14-3. ROOF REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

All except M996, M996A1, M997, M997A1,

M997A2, M998, M998A1, M1035, M1035A1,

M1035A2, M1037, M1038, M1038A1, M1042,

M1097, M1097A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix G, Item 1)

Materials/Parts

Twelve locknuts (Appendix E, Item 57)

Nut and lockwasher assembly

(Appendix E, Item 96)

Sealing compound (Appendix B, Item 49)

Manual References

TM 9-2320-280-20

TM 9-2320-280-24P

Personnel Required

One mechanic

One assistant

Equipment Condition

Weapon station tray removed (TM 9-2320-280-20).

Maintenance Level

Direct support

NOTE

It may not be necessary to perform the following procedure if damage is

isolated to blast shield. Refer to (para. 14-7) for replacement of blast

shield.

1.

Remove twelve locknuts (5), washers (2), capscrews (1), washers (2), and six roof retainers (3) from

bearing (4). Discard locknuts (5).

NOTE

Perform step 2 for M966, M966A1, M1036, M1045, M1045A1, M1045A2,

M1046, and M1046A1 TOW vehicles only.

2.

Remove nut and lockwasher assembly (7) from screw (6) to free TOW wiring harness clamp (8) (at

right front “B” pillar cover screw (6) only). Discard nut and lockwasher assembly (7).

14-2