TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 757 of 1258

TM 9-2320-280-34

15-4.

9,000 LB. WINCH REPAIR

This task covers:

a.

Disassembly

c.

Inspection

b.

Cleaning

d.

Assembly

INITIAL SETUP:

Applicable Models

Materials/Parts

M997A2, M1025A2, M1035A2, M1043A2

Coating compound (Appendix B, Item 11)

M1045A2, M1097A2

Lubricating oil (Appendix B, Item 28)

Aircraft grease (Appendix B, Item 20)

Bushing grease (Appendix B, Item 22)

Anaerobic pipe sealant (Appendix B, Item 49)

Tools

General mechanic's tool kit:

Manual References

automotive (Appendix G, Item 1)

TM 9-2320-280-20

Special Tools

TM 9-2320-280-24P

Hex head driver, 5/32 in. (Appendix G, Item 117)

Equipment Condition

Materials/Parts

Winch removed (TM 9-2320-280-20).

O-ring seal (Appendix E, Item 102)

Gasket (Appendix E, Item 20)

Two gaskets (Appendix E, Item 21)

Maintenance Level

Lockwasher (Appendix E, Item 81)

Direct support

a.

Disassembly

NOTE

Tag leads for assembly.

1.

Remove two screws (2), clamps (1), and leads 6Sc (3) and 7C (4) from motor end drum support (8) and

,

gear end drum support (9).

2.

Remove three screws (5) and motor control cover (6) from control (7).

15-16