TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 758 of 1258

TM 9-2320-280-34

15-4. 9,000 LB. WINCH REPAIR

NOTE

In order to perform steps 3 through 9, it may be necessary to remove

plastic coating from winch.

3.

Remove nut (14) and lead 6 (15) from control (16).

4.

Remove capscrew (13), lockwasher (12), and lead 7 (11) from motor (10). Discard lockwasher (12).

5.

Disconnect motor connector (18) from control connector (17).

6.

Slide back three rubber boots (19) and remove nuts (21) and control leads (20) from motor (10).

7.

Remove set screw (22) from motor (10).

8.

Loosen two clamps (23) and remove control (16) from motor (10).

9.

Remove clamps (23) from motor (10).

15-17