TM-9-2320-280-34

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JANUARY 1996

TM-9-2320-280-34 - Page 754 of 1258

TM 9-2320-280-34

15-3. 6,000 LB. WINCH REPAIR

15.

Assemble gasket (8) and coupling (19) on motor (21) and install on drum support (15), ensuring to

align reference marks.

16.

Install motor (21) on drum support (15) with ten socket head screws (20). Using hex head driver,

tighten screws (20) to 35 lb-in. (4 N.m).

NOTE

If motor or control have been pre-coated with sealing compound, remove

compound from between motor case and control mounting gear contact

area. Failure to do so may cause improper grounding of control.

17.

Install clamp (18) on motor (21).

18.

Install control (17) on motor (21).

15-13