TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-83.
CIGAR LIGHTER REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
1.
Four screws (1).
Loosen.
2.
Instrument panel (2).
Lower.
3.
Connector (3).
Remove.
4.
Heating unit (6)
Remove item (6) from item
and knob (7).
(7).
5.
Shell (4).
Unscrew from item (5).
6.
Diaphragm (5).
Remove from item (2).
Clean.
B. INSTALLAIION.
7.
Diaphragm (5).
Install in item (2) from
front.
8.
Shell (4).
Install on item (5) and
Be sure item (4) makes
tighten.
good ground contact
with item (2).
9.
Connector (3).
Install on item (5).
10. Knob (7) and
Connect together.
heating unit (6).
11. Instrument panel (2).
Raise into place.
12. Four screws (1).
Tighten.
13. Batteries.
Connect.
Refer to paragraph
3-120.
C. OPERATIONAL CHECK.
14. Knob (7) and
Insert and press.
Verify
heating unit (6).
that element gets hot.
NOTE
Follow-on maintenance action required:
None.
3-480