TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 116 of 852
TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-85.
ETHER LAMP AND CLEARANCE LAMP REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
Clearance lamp
replacement
and ether lamp replacement are the similar. This procedure covers
clearance lamp re- placement.
A.
REMOVAL.
1.
Wire (5), wire
Remove from underneath item
Tag for identification.
(6), and wire (3).
(1). Item (6) and item (3)
share a common terminal.
2.
Clearance lamp
Remove from item (1) by push-
(4).
ing outward from behind.
B.
INSTALLATION.
3.
Clearance lamp
Aline and press into item
(4).
(1).
4.
Wire (5), wire
Connect.
Connect according to
(6), and wire (3).
identification tag from
step 1.
5.
Batteries.
Connect.
Refer to paragraph
3-120.
C.
OPERATIONAL CHECK.
6.
Headlamp switch
a.
Pull out to first stop.
Refer to TM 9-2320-
(2).
283-10.
b.
Verify that item (4) comes
on.
NOTE
Follow-on maintenance action required:
None.
3-488
Back to Top
