TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-84.
LOW AIR PRESSURE LAMP REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A.
REMOVAL
.
1.
Four screws (1)
Loosen.
2.
Instrument panel
Lower.
(2).
3.
Wires (4) and (5)
Remove
Tag for identification.
4.
Low air pressure
Remove.
lamp assembly (3).
B.
INSTALLATION.
5.
Low air pressure
Aline and press into item
lamp assembly (3)
(2).
6.
Wires (4) and (5)
Connect
Connect according to
identification tag from
step 3.
7.
Instrument panel
Raise into place.
(2).
8.
Four screws (1)
Tighten.
9.
Batteries
Connect
Refer to paragraph
3-120.
C.
OPERATIONAL CHECK.
10. Air pressure supply
Bleed off air pressure
Refer to TM 9-2320-
reservoir
283-10.
11. Engine run switch
a.
Turn on.
b.
Verify that item (3)
comes on.
NOTE
Follow-on maintenance action required:
None.
3-484