TM-9-2320-283-20-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3

DECEMBER 1983

TM-9-2320-283-20-2 - Page 376 of 852

TM 9-2320-283-20-2

ELECTRICAL SYSTEM.

3-127. WIRING HARNESS REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

B.

CIRCULAR CONNECTOR PLUG REPAIR.

NOTE

Use this procedure to repair any one of the five connector plugs.

18. Plug (18).

Unscrew and remove from item

(19).

19. Pin (37).

Using item (39) or (40), pull

If item (18) is being

out from rear side of item

replaced, repeat this

(18).

step until all items

(37) have been removed.

Be sure to tag items

(36).

20. All parts.

Clean and inspect.

Refer to paragraphs 3-4

and 3-5.

If any items

(37) are damaged, do

steps 21 and 22.

21. Pin (37).

Remove from item (36) and

discard.

22. New pin (37).

Using item (38), install

Be careful not to damage

onto item (36).

item (37) during this

step.

23. Pin (37).

Push into rear end of item

If item (18) is new,

(18) until it snaps into

repeat this step until

place.

all items (37) have been

installed.

Check the

mating side of item (18)

to make sure all items

(37) are on the same

level.

24. Plug (18).

Line up slots with pins on

item (19) and screw in until

it clicks into place.

3-748