TM-9-2320-283-20-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3

DECEMBER 1983

TM-9-2320-283-20-2 - Page 382 of 852

TM 9-2320-283-20-2

ELECTRICAL SYSTEM.

3-127. WIRING HARNESS REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

D.

RELAY CONNECTOR RECEPTACLE REPAIR.

NOTE

Use this procedure to repair any one of the eight relay connector receptacles.

35 Circuit breaker

Remove

Refer to paragraph

mounting bracket

3-114.

36 Relay (46)

Remove from item (8) being

repaired.

37 Three relays (46)

Remove from first, fifth, and

eighth items (8).

38 Three screws (48)

Remove from item (47).

and eight

receptacles (8).

39 Terminal (50)

Using small screwdriver,

If item (8) is being

remove from rear end of item

replaced, repeat this

(8)

step until all items

(50) have been removed.

Be sure to tag items

(49).

40 All parts

Clean and inspect

Refer to paragraphs 3-4

and 3-5.

Remove and

replace any damaged

items (50).

Remove

tape, and replace item

(8), if damaged.

Retape

new item (8) to other

seven items (8), as

needed.

3-754