TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-127. WIRING HARNESS REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
F.
12 VOLT CONNECTOR RECEPTACLE REPAIR.
51 Boot (60)
Pull off of item (11) and
onto item (58).
52 Screw (61)
a
Loosen, but do not remove.
b
Pull out item (59)
If item (11) is being
replaced, repeat this
step until all items
(59) have been removed.
Be sure to tag items
(59).
53 Two screws (62),
Remove from item (51)
Do this step only if
lockwashers (63),
replacing item (11).
washers (64),
nuts (65), and
receptacle (11).
54 All parts
Clean and inspect
Refer to paragraphs 3-4
and 3-5.
Remove and
replace item (60), if
damaged.
55 Receptacle (11)
a
Position on item (51).
b
Secure with two items
(62), (63), (64), and
(65).
56 Wire (59)
a
Position in item (11).
b
Secure with item (61)
If item (11) is new, re-
peat this step until all
items (59) have been
installed.
57 Boot (60)
Push onto item (11).
3-760