TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-127. WIRING HARNESS REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
G.
PLASTIC CONNECTOR RECEPTACLE OR PLUG REPAIR.
NOTE
Use this procedure to repair any one of the five plastic connector receptacles or plugs.
58 Receptacle (16)
Pull off of item (15).
59 Terminal (66)
Using small screwdriver,
If item (16) is being
remove from rear end of
replaced, repeat this
item (16)
step until all items
(66) have been removed.
Be sure to tag all items
(67).
60 All parts
Clean and inspect
Refer to paragraphs 3-4
and 3-5.
Remove and
replace any damaged
items (66).
61 Terminal (66)
Push into rear of item (16)
If item (16) is new, re-
until it snaps in place
peat this step until all
items (66) have been
installed.
62 Receptacle (16)
Push onto item (15).
3-762