TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 88 of 852
TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-80.
TURN SIGNAL SWITCH REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
NOTE
If only
bulb
is to
be
replaced, do steps 5, 6,
7, 8, 9, 10, 14,
15, 16, 18,
19 , and 20
A. REMOVAL.
1. Connector (12).
Remove from mating connector
under instrument panel.
2. Wire (17).
Remove from item (10) bundle.
Unwrap electrical tape.
3. Two screws (7) and
Remove.
two anchors (6).
4. Turn signal switch
Remove.
assembly (16),
strap (5), and
two clips (8).
B.
DISASSEMBLY
5. Two screws (2).
Remove.
6. Cover (1).
Remove.
7. Handle (15).
Remove.
Item (15) has lead from
Item (4) attached.
8. Spring clip (14).
Remove.
9. Bulb (3) and
Remove.
socket (4).
10. Bulb (3).
Remove from item (4).
Push in and turn
counterclockwise one
quarter turn.
11. Hazard switch
Remove.
actuator (13).
12. Seven terminals
Remove from item (12)
Tag for identification.
(11).
3-460
Back to Top
