TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 90 of 852
TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-80.
TURN SIGNAL SWITCH REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
C. ASSEMBLY.
13. Seven terminals
Install in item (12).
Connect according to
(11).
identification tag from
step 12.
14. Bulb (3).
Install in item (4).
Push in and turn one
quarter turn clockwise.
15. Spring clip
Install on side of item (4).
Make sure lead from item
(14).
(4) is secured inside
item (14).
16. Bulb (3) and
Install in item (15).
socket (4).
17. Hazard switch
Place over pin and press
actuator (13).
down.
18. Handle (15).
Install.
Use item (4) end of item
(15) to push in on
spring loaded hazard
switch.
19. Cover (1).
Place in position.
Aline
item (18) with hole on
underside of item (1).
CAUTION
Switch body and cover are made of aluminum.
Do not
overtighten screws that fasten
cover to switch body.
Failure to heed caution will result in damage to switch body.
20. Two screws (2).
Install and tighten.
Do not overtighten.
3-462
Back to Top
