TM-9-2320-283-20-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE PART 2 OF 3
DECEMBER 1983
TM-9-2320-283-20-2 - Page 92 of 852
TM 9-2320-283-20-2
ELECTRICAL SYSTEM.
3-80.
TURN SIGNAL SWITCH REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
D.
INSTALLATION.
21 Two screws (7)
Insert two items (7) into two
items (6).
22 Two screws (7)
Insert two assembled items
Do not tighten.
and two anchors
(7) and (6) into slots in
(6)
item (9).
23 Strap (5)
Bend through and around one
item (8).
24 Strap (5) and one
Put one item (8) between item
clip (8)
(6) and item (9).
25 Switch (9)
Raise into position on steer-
ing column and hold.
26 Strap (5)
Insert unbent portion of item
Scrape paint from
(5) through slot in other
steering column under
item (8).
Wrap item (5)
item (5) to make ground
around steering column
contact.
Estimate length needed to
reach item (9) and adjust to
suit.
27 Clip (8)
Catch item (8) under item (6)
and tighten two items (7)
equally until item (9) is
firmly clamped to steering
column.
28 Connector (12)
Reconnect.
29 Wire (17)
Position alongside item (10)
and wrap with electrical tape.
3-464
Back to Top
