TM-9-2320-283-34-1

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-1 - Page 457 of 624

TM 9-2320-283-34-1

TRANSMISSION.

3-43.

GEAR UNIT AND MAINSHAFT REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

C.

ASSEMBLY.

NOTE

If sleeve bushings were removed from sun gear and shaft assembly proceed to step 4.

If not, go to

step 5.

4.

Sun gear and shaft

a. Coat bore in splined end

assembly (10).

of item (10) with locking

sealant.

NOTE

Split in bushing must be more than 1/8 turn away from swaging hole in shaft.

b. Position new item (9) into

item (10).

NOTE

•

Use a mimimum of 500 pounds force on suitable installation

tool

to assure proper seating of

bushing.

•

Use long part of installer when working on splined end of shaft.

c. Using suitable installa-

Use tool No.

J-24201.

tion tool, press item (9)

Seat 0.360 inch below

into item (10).

end surface of item (10).

3-404