TM-9-2320-283-34-1
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, M915A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-1 - Page 463 of 624
TM 9-2320-283-34-1
TRANSMISSION.
3-43.
GEAR UNIT AND MAINSHAFT REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
C.
ASSEMBLY (Continued).
4.
Sun gear and shaft
n. Clamp item (36) in a vise
Use tool No.
J-28489-3.
assembly (10)
and place item (10) into
(continued).
item (36).
o. Put items (35) and (34) in
Use tool No.
J-28489-2
position inside item (10).
and J-28489-1.
p. Attach item (37) to item
(35).
CAUTION
Keep reamer and shaft assembly at full drill
speed
when
pulling it
back through the sleeve
bushing. If reamer is not rotating during retrieval it could damage the sleeve bushing.
q. Machine item (9) while
adding cutting lubricant
through item (38).
r. Remove items (35) and (34)
from item (10).
s. Remove item (10) from item
(36) and remove item (36)
from vise.
t.
Remove items (34) and (35)
from item (37).
Separate
items (34) and (35).
3-410
Back to Top
