TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 38 of 570
TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-65. FORWARD-REAR AXLE YOKE AND OIL SEAL REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL.
1. Nut (6).
Remove from item (2).
Use tool No. J-3453 to
prevent item (4) from
turning.
2. Washer (5) and
Remove from item (2).
yoke and mudslinger
It may be necessary to
assembly (4).
tap item (4) with a soft
face hammer for it to
slide off of item (2).
3. Seal (3).
Remove from item (1).
Use a punch and a hammer
to remove item (3). Dis-
card item (3).
B. CLEANING.
4. All parts.
Clean.
Refer to paragraph 3-4.
C.
INSPECTION
5. All parts.
Inspect.
Refer to paragraph 3-5.
D.
INSTALLATION.
6. New seal (3).
Install into item (1).
Coat outside diameter of
item (3) with OE/HDO-10
lubricating oil for ease
of installation.
Use a
suitable oil seal tool
for installation.
7. Yoke and mudslinger
assembly (4),
Install onto item (2). Torque Use tool No. J-3453 to
washer (5), and
item (6) to 780-960 lb-ft.
prevent item (4) from
nut (6).
turning.
NOTE
Follow-on maintenance action required:
Install drive shaft (TM 9-2320-
283-20).
3-594
Back to Top
