TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 46 of 570
TM 9-2320-283-34-2.
REAR TANDEM AXLES.
3-67. DIFFERENTIAL CARRIER COVER REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. REMOVAL.
CAUTION
Position a suitable jack under dif-
ferential
carrier
cover
assembly
before attempting to remove hex head
bolts.
1. Five short screws
Remove from item (3).
(5), four long
screws (8), and
eight lockwashers
(4).
WARNING
During removal
and installation of
differential carrier, cover assembly
and the interaxle differential may
fall from carrier.
Use extreme care
when removing to prevent damage or
personal injury.
2. Differential
carrier cover
assembly (3).
Remove from item (2).
Tap back face of item
(1) to dislodge item
(2). If item (3) does
not dislodge easily,
strike the side of item
(3) near the dowel pin
locations.
B. INSTALLATION.
3. Interaxle dif-
Install in item (2).
ferential assembly
(1).
4. Differential
a. Apply silicone sealant
carrier cover
on mating surface as
assembly (3).
shown.
Sealant will set in
twenty minutes.
3-602
Back to Top
