TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 54 of 570
A. DISASSEMBLY
TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-68. DIFFERENTIAL CARRIER COVER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
9. Snapring (42).
Remove from item (2).
10. Gear (41), washer
(1),
Remove from item (2).
and washer
(39).
11. Two bushings (40). Remove from item (41).
12. Nut (18).
Remove from item (17).
Item (39) is a bronze
thrust washer.
Discard item (40).
To loosen item (18),
prevent item (8) from
turning.
13. Nut (3).
Remove from item (2).
14. Washer (9) and
yoke (8).
Remove from item (2).
Use a suitable yoke
holding tool to prevent
item (8) from turning.
Hitting the backside of
item (8) with a brass
hammer will assist in
removal.
NOTE
Do not discard bearing cover shims.
Shims will be needed during assembly.
15. Five screws (10)
and washers (11).
Remove from item (6).
16. Retainer (6).
Remove from item (36).
Item (6) may require
slight upward and down-
ward pressure to remove.
17. Shim (5).
Remove from item (6).
18. Seal (7).
19. cup (4).
Remove from item (6).
Remove from item (6).
More than one shim may
be used.
Do not discard
item (5).
Discard item (7).
A hammer and a punch may
be used to remove item
(4).
3-610
Back to Top
