TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 58 of 570
D. ASSEMBLY
TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-68. DIFFERENTIAL CARRIER COVER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
30. Two gears (16).
Install in item (36).
Item (16) with long
threaded shaft is placed
in hole next to hole of
item (2).
31. New O-ring (15).
Install in item (14).
32. Housing (14).
Position on item (36).
33. Four screws (12)
Install in item (14) and
and washers (13).
torque items (12) to 85-105
lb-in.
34. Gear (17).
Install onto threaded shaft
of item (16).
35. Nut (18).
Install onto threaded shaft
of item (16) and hand
tighten.
36. Screen (35).
Install in item (36) and
torque to 40-60 lb-ft.
37. New cone (37).
Install onto item (2) using
a suitable press and bearing
cone adapter.
38. New cup (4).
Install into item (6) using
Item (4) should be
a suitable press.
pressed in until it
bottoms in item (6).
39. New seal (7).
Install into item (6) using
Item (7) should be
a suitable seal installer.
pressed in until it is
flush with edge of item
(6).
40. Two new bushings
Install as shown into item
(40).
(41) using suitable bushing
installer tool.
41. Fork (19).
Install into item (36).
3-614
Back to Top
