TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 64 of 570
E. ADJUSTING
TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-68. DIFFERENTIAL CARRIER COVER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
60. Retainer (6).
Adjust end play as follows:
a. Using feeler gage and
hand pressure on item
(6),
measure clearance
between item (36) and
item (6) as shown.
b. Add 0.005 to the bearing
Item (5) are available
cover clearance measured
in 0.003, 0.005, 0.010,
in step a and construct
and 0.020 inch
a shim pack of this site.
If measured bearing
cover clearance is 0.034
and 0.005 has been added
to provide end play, the
shim pack size should be
0.039.
c. Remove item (6) and
install shim pack (5).
d. Install item (6), five
items (11), and torque
to 85 lb-ft.
e. Install items (8), (9),
and (3). Tighten item
(3) snugly. Tap end of
item (2) lightly to seat
bearing.
3-620
Back to Top
