TM-9-2320-283-34-2
TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1983
TM-9-2320-283-34-2 - Page 66 of 570
E. ADJUSTING
TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-68. DIFFERENTIAL CARRIER COVER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
60. Retainer (6)
(continued).
Adjust end play as follows
(continued):
f.
Check end play of item
(2) with dial indicator
If end play is less that
0.003 inch add items (5)
as shown. End play should to shim pack. If end
be between 0.003-0.007
play is more than 0.007
inch.
remove shims as required
from shim pack. The
five items (10) and (11)
will have to be re-
torqued if shims have
been added or removed.
g. With end play correct
proceed to step 61.
61. Nut (3).
Torque to 780-960 lb-ft.
Use a suitable yoke
holding tool to prevent
yoke from turning while
torquing.
NOTE
*Differential carrier cover may be re-
moved from differential carrier after
end play adjustments and torquing of
yoke have been completed.
Removal of
differential carrier cover is neces-
sary if repair of differential carrier
is required.
*Follow-on maintenance action required:
Install differential lockout
(para 3-71).
Install differential carrier cover
on differential carrier, if removed
(para 3-67).
3-622
Back to Top
