TM 9-2320-283-34-2
CAB AND BODY.
3-112. DOOR REPAIR (Continued)
LOCATION/ITEM
D. ASSEMBLY (Continued).
ACTION
REMARKS
NOTE
Skip steps 93 thru 95 if hinge was not
removed.
92. Hinge assembly
(21).
a. Line up holes in item (21)
with holes in item (24).
b. Secure finger tight with
eight items (22) and new
Position item (21) so
items (23).
that items (22) are
centered in holes in
item (21). This will
help you aline item (24)
when installed.
c. Lubricate with oil.
93. Eight screws (22). Tighten.
94. Door (24).
95. Strap (32).
Install.
Refer to paragraph 3-111.
a. Line up holes in item (32)
with holes in cab shell.
b. Secure with two items (33)
and (34).
c. Line up holes at other end
of item (32) with holes in
item (46).
d. Secure with two items (33)
and (34).
3-1004