TM 9-2320-283-34-2
CAB AND BODY
3-113. DOOR STRIKER ASSEMBLY REPLACEMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
7. Plate assembly
(3).
8. Plate assembly
(6).
9. Pin (9).
Place into position inside
item (1).
a. Line up holes in Item (6)
with holes in item (3).
b. Secure fingertight with
two items (11).
Secure fingertight in item
Keep item (7) lined up
with item (12) while
item (9) is installed.
10. Pin (9) and two
screws (11).
Tighten enough to barely
allow item (9) with attached
items (3) and (6) to move up
and down.
11. Two plates (3) and Adjust.
(6) and pin (9).
Go to step 13.
NOTE
Only do
step 12
if you
were
referenced from another procedure,
otherwise go to step 13.
12. Two screws (11)
and pin (9).
Loosen enough to barely move
item (9) with attached items
(3) and (6) up and down.
3-1012